基于最小包容区域的球度误差评定方法

针对球度误差评定方法存在原理误差或模型误差,提出了一种符合最小包容区域定义的球度误差评定方法,即将几何搜索逼近算法与基于最小包容区域法的球度误差评定的几何结构和定义结合起来的准确评定方法。对仿真数据和其他文献中的数据进行了评定。所提方法与其他方法的评定结果表明,所提方法可以准确地找到最小包容区域球的球心并给出球度误差的精确解。     

10MW级深冷液化空气储能发电系统自动启动控制方法研究

以10 MW级深冷液化空气储能发电系统为研究对象,简要介绍了技术原理、系统构成、主要设备及工艺流程,并从自动控制视角,分别设计了储、释能阶段的启动方法。基于该自动启动方法,可完成储能阶段空气净化及压缩、空气液化、储热和蓄冷子系统的联合运行以及释能阶段储热、蓄冷和膨胀发电子系统的联合运行,实现了储能阶段自动达到额定出液量及释能阶段自动满足额定发电量的需求,提高了能量型机械储能系统对电网负荷变化的响应速度。     

低比转速压气机轮毂轮缘型线多目标优化设计

对电动增压器用低比转速离心压气机轮毂轮缘进行优化设计。采用NUMECA/FINE Design 3D对压气机进行几何参数化,生成数据库样本,利用人工神经网络和遗传算法对轮毂轮缘型线进行优化,并进行流场分析。仿真结果表明,在设计转速为40000 r/min时,优化后设计点压比和效率分别提高6.59%和3.73%。     

Multiemotional product color design using gray theory and nondominated sorting genetic algorithm-III

When users select products, they consider the emotional experience resulting from the color of the product. However, the emotional demands of users for product color are multidimensional and diverse. It is very important yet difficult to accurately grasp multiemotional image requirements and effectively convert them into design elements. Therefore, multiemotional product color design (MEPCD) has become a very important and challenging research topic. In this article, a novel MEPCD system using gray theory (GT) and nondominated sorting genetic algorithm-III (NSGA-III) is proposed to effectively solve the MEPCD problem. First, the image perception spaces of users, which exist in different emotional dimensions, were collected using factor analysis and the semantic differential technique. Then, GT was used to establish a multidimensional emotional product color image evaluation model. Finally, NSGA-III was used to optimize and design a multiemotional color scheme for a product. Furthermore, according to actual conditions, an MEPCD system was established based on the proposed method. The design case study shows that the method and design system proposed in this article have a certain range of applicability and can effectively improve the practicality of MEPCD.     

Allocation and sizing of battery energy storage system for primary frequency control based on bio-inspired methods: A case study

This paper presents a new procedure for optimal allocation and optimal sizing of a battery energy storage system (BESS) for primary frequency support in an isolated power system. For the BESS allocation, a transmission bus system with larger frequency decline is recognized and the BESS sizing is performed by a constrained optimization strategy based on a new modified metaheuristic, called Developed Harris Hawks Optimization (DHHO). The simulation results of the suggested DHHO are compared with Bat Optimization Algorithm (BOA) and Genetic Algorithm (GA) from the literature to show the method efficiency. The final results showed higher precision with lower required iterations for the suggested DHHO method. Also, the proposed DHHO gives lower investment costs for BESS with lower power and energy requirement toward the other compared methods.     

全自动集装箱码头装卸系统质量管理

全自动集装箱码头装卸系统集成了当今世界各项先进技术,在研发、制造、调试过程中,都要坚持质量第一、安全第一的原则,确保各项技术参数可靠,设备运行稳定。在总结国内几个全自动码头装卸系统的质量管理方法与经验的基础上,结合自动化码头自身特点,给出全自动集装箱码头装卸系统主要质量管理方法,进一步丰富发展自动化码头装卸系统建造过程中的“不欠债离岸”质量管理理念。     

径向式汽轮机叶轮参数分析及优化

径向式汽轮机叶轮的叶片角度,叶轮进口直径和叶片宽度等因素直接影响着它的蒸汽利用率和机械效率。针对目前径向式汽轮机效率不高,能量损失偏大等问题,以某径向式汽轮机叶轮为研究对象,利用Proe、Ansys等软件对其进行流体域建模,然后进行网格划分、数值模拟、流场分析等一系列工作,分析了该径向式汽轮机的工作效率和损失,并提出了优化叶轮参数的具体方法。     

助燃空气对乙烯裂解炉NOx排放的影响

乙烯裂解炉内复杂物理化学过程耦合模拟与优化能够满足乙烯装置对高效率、低污染和低成本的设计和操作要求，对提高乙烯工业的竞争力具有重要意义。针对简单燃烧机理难以准确预测炉膛燃烧生成NO_x浓度分布的弊端，提出了在裂解炉使用更准确的简化GRI-Mesh 3.0机理结合涡耗散概念(EDC)模型的方法，并对Sandia Flame D的燃烧过程进行计算流体力学(CFD)模拟，验证了此耦合模型的可靠性。在已建立的燃烧模型的基础上，研究了助燃空气对降低裂解炉NO排放的影响，结果表明：在满足裂解炉热效率的情况下，空气预热温度为300~600 K、过量空气系数为1.1时降低NO的效果最佳。     

国内农用拖拉机自动转向系统研究现状

作为精准农业的重要组成部分,农用拖拉机自动转向系统的研究也越来越多。通过对相关文献进行梳理和分析,分别从自动转向系统的两个组成部分(自动转向执行机构和自动转向控制系统)阐述国内农用拖拉机自动转向系统的研究成果,为设计合理的自动转向执行机构和稳定准确的自动转向控制系统提供建议和参考。